Keywords
arid-hot climate
thermal insulation
LCC analysis
ShNK 2.01.04-22
basalt wool
energy audit
How to Cite
Abstract
This article explores methods for improving the energy efficiency of buildings, considering the specific arid and hot climatic conditions of Uzbekistan. Based on the updated ShNK 2.01.04-22 regulations, the thermophysical properties of aerated concrete, basalt, and polymer-based insulators are analyzed. Using mathematical modeling, the Life Cycle Cost (LCC) and investment payback periods were determined. The results demonstrate that implementing efficient thermal protection can reduce cooling and heating costs by 30-50%, proving the economic and environmental viability of these technologies in the region.
References
[1] O‘zbekiston Respublikasi Prezidentining PQ-4422-sonli qarori. “Iqtisodiyot tarmoqlari va ijtimoiy sohaning energiya samaradorligini oshirish chora-tadbirlari to‘g‘risida”. – Toshkent, 2019.
[2] Feist W. “The Passive House House Planning Package”. Passive House Institute, Darmstadt, Germany, 2015.
[3] Hens H. “Building Physics: Heat, Air and Moisture”. Ernst & Sohn Publishing, Berlin, 2017. – 312 p.
[4] Abdullaev, U., Dzhusuev, U., Asanova, S., Matniyazov, Z., & Pavlovskyi, S. (2025). Research into modern methods of producing energy-efficient building materials. AIS-Architecture Image Studies, 6 (1), 126-141.
[5] Chel, A., & Kaushik, G. (2018). Renewable energy technologies for sustainable development of energy efficient building. Alexandria engineering journal, 57(2), 655-669.
[6] Khdair, A. I., Aburumman, G. A., Gholipour, S., & Afrand, M. (2025). Up-to-date literature review on zero-carbon buildings and cities: energy innovations, challenges, and prospects. Sustainable Energy Technologies and Assessments, 82, 104505.
[7] Cornaro, C., & Buratti, C. (2020). Energy efficiency in buildings and innovative materials for building construction. Applied Sciences, 10(8), 2866.
[8] Genjebaev, T. (2023). THE ENERGY EFFICIENCY OF BUILDINGS IN THE CITY OF NUKUS. Modern Science and Research, 2(10), 437-440.
[9] Kulmirzayev, J. (2025). INCREASING THE ENERGY EFFICIENCY OF RESIDENTIAL BUILDINGS'EXTERIOR WALLS MADE OF GASO-CONCRETE BLOCKS. International Journal of Artificial Intelligence, 1(4), 256-260.
[10] Kurbanova, S. (2024). Increasing the innovation potential of construction materials industry enterprises. YASHIL IQTISODIYOT VA TARAQQIYOT, 2(11).
[11] Matyokubov, B., & Zoyirova, E. (2025). HEAT INSULATION AND ENERGY-SAVING CONSTRUCTION MATERIALS. International Journal of Artificial Intelligence, 1(2), 1378-1383.
[12] Samigov N.A. “Energiya va resurs tejamkor qurilish materiallari va texnalogiyalar”. O‘quv qo‘llanma. -T.: 2016, 424 bet.
[13] International Energy Agency (IEA). "Energy Efficiency in Buildings Report". www.iea.org.
[14] O‘zbekiston Qurilish vazirligi rasmiy sayti. www.mc.uz.
[15] UNDP Uzbekistan (2021). Energiya tejamkor binolar qurilishi bo‘yicha hisobot.
[16] Raximov M.A. “Qurilish materiallari va buyumlari”. Darslik. – Toshkent: “O‘qituvchi”, 2015. – 320 b.
[17] Tulyaganov A.A. “Mahalliy xomashyolar asosida energiya tejamkor qurilish materiallari ishlab chiqarish texnologiyasi”. Ilmiy to‘plam. – Toshkent: TQQU, 2020
[18] Сатторов, З., & Отажонов, О. (2023). Issiqlik elektr stansiyasi kullari asosidagi avtoklavlanmaydigan gazkulbeton qorishmasining reologik xossalariga “sdj-1” superplastifikator kimyoviy qo‘shimchasining ta’siri. Сейсмическая безопасность зданий и сооружений, 1(1), 190-193.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2026 G‘ayimnazarov I.X., Raxmatov M.I., Shermatov B.B. (Muallif)